{"id":2053,"date":"2007-11-10T02:05:23","date_gmt":"2007-11-10T06:05:23","guid":{"rendered":"http:\/\/www.nearfuturelaboratory.com\/2007\/11\/10\/lis302dl-%e2%80%94-wii-accelerometer\/"},"modified":"2017-08-18T18:02:57","modified_gmt":"2017-08-18T18:02:57","slug":"lis302dl-wii-accelerometer","status":"publish","type":"post","link":"https:\/\/blog.nearfuturelaboratory.com\/2007\/11\/10\/lis302dl-wii-accelerometer\/","title":{"rendered":"LIS302DL \u2014 Wii Accelerometer"},"content":{"rendered":"
<\/p>\n I’ve been wanting to mess with this thing for a spell, but I couldn’t find a breakout board at the usual places, so I just up and made one. The LIS302DL 3-axis accelerometer<\/a> is used in the Wii’s controller, as best as I know. Cool little 2D barcode on the chip there, huh?<\/p>\n It’s pretty nice \u2014 digital, SPI and TWI compatible, with a pair of interrupt signals to wake your whatever up when it sense acceleration above certain thresholds. Competitively priced with respect to the ADXL330 3-axis analog accelerometer<\/a> I’ve been using. I’ve played with the LIS3LV02DQ<\/a>, which is also by ST Microelectronics \u2014 this one is smaller, and a little cheaper and a much lower pin count.<\/p>\n <\/p>\n Why’s it sitting on an old PCB with a clip holding it down? I got these boards done quite thin for some reason \u2014 just ’cause, I guess. Turns out the hot air I normally use to do reflow soldering just about warm up the PCB enough so it goes a bit soft. In a vice grip, it starts to warp! That’s just not good. This is my alternate jig \u2014 but, next time I’m back to the regular thickness FR4.<\/p>\n","protected":false},"excerpt":{"rendered":" I’ve been wanting to mess with this thing for a spell, but I couldn’t find a breakout board at the usual places, so I just up and made one. The LIS302DL 3-axis accelerometer is used in the Wii’s controller, as best as I know. Cool little 2D barcode on the chip there, huh? It’s pretty … Continue reading LIS302DL \u2014 Wii Accelerometer<\/span><\/a><\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[78,113,156],"tags":[],"yoast_head":"\n<\/a><\/p>\n
<\/a><\/p>\n