{"id":4657,"date":"2010-07-23T15:17:51","date_gmt":"2010-07-23T22:17:51","guid":{"rendered":"http:\/\/www.nearfuturelaboratory.com\/?p=4657"},"modified":"2017-08-18T17:59:21","modified_gmt":"2017-08-18T17:59:21","slug":"weekending-07232010","status":"publish","type":"post","link":"https:\/\/blog.nearfuturelaboratory.com\/2010\/07\/23\/weekending-07232010\/","title":{"rendered":"Weekending 07232010"},"content":{"rendered":"
<\/p>\n
Okay, well..Now the week is ending today. Whatever.<\/p>\n
Couple of things to note this week.<\/p>\n
I finally finished the Kicker Studio’s Six Questions<\/a>. They’ll put it up coming up here. I really didn’t make a big thing about it, just finished it, but it was a good set of questions to think about why I’m doing this design thing. I’ll be sharing some thoughts and stuff at their upcoming Device Design Day<\/a> up in San Francisco in August.<\/p>\n There were some fascinating all-day review sessions in the studio for some in-development stuff. It’s quite fascinating to see things as they’re being made and refined and perfected. The conversations themselves and the sort-of meta discussions about what makes compelling, usable, engaging UI\/UX\/ID are for me great learning experiences. There were some related discussions in the studio more generally about the impossibility of distinguishing the “industrial design” (which generically and perhaps wrongly only means the physical material of something) and the “interface design.” Sort of a design philosophy thing. It bakes my brain when people stare blankly and don’t get this idea.<\/p>\n The Media Design Program at Art Center<\/a> started its Ideas In The Making 2010<\/a>, so I went to the rooftop opening event, where Ben Hooker and Sascha Pohflepp and other residents presented their work. It sounds like an enviable residency for all these folks and I hope to spend a bit of time over there checking out the work as it develops, for sure.<\/p>\n We had a toolpathing tool-torial this Tuesday’s Tangible Tuesday (err..alliteration alert..uhh..). That’s the bit for going from a 3D digital model to the program (really a large list of numbers and tool changes) that tells the Fanuc CNC machine how to cut stock. Or, how to make stuff with a CNC machine. Nikolaj has done some amazing stuff to make that process much, much easier so basically learning how that all works. I predict running through this process in the near future.<\/p>\n Rhys took most everything off of my bike turning it into a single speed. Pedaling faster, going a little slower, but basically covering the same ground in the same amount of time. These are both almost identical routes, done at about the same ungodly hour in the morning in Venice which is flat as a pancake. I won’t even note elevation change.<\/p>\n <\/p>\n \n27 Speed<\/strong> Moving Time:\t00:35:54 Heart Rate Cadence \nSingle Speed<\/strong> Moving Time:\t00:39:08 Heart Rate Cadence <\/p>\n","protected":false},"excerpt":{"rendered":" Okay, well..Now the week is ending today. Whatever. Couple of things to note this week. I finally finished the Kicker Studio’s Six Questions. They’ll put it up coming up here. I really didn’t make a big thing about it, just finished it, but it was a good set of questions to think about why I’m … Continue reading Weekending 07232010<\/span><\/a><\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[47,84,197],"tags":[],"yoast_head":"\n<\/a>\n<\/div>\n
\nTime:\t00:36:44
\nDistance:\t9.14 mi<\/p>\n
\nElapsed Time:\t00:38:50
\nAvg Speed:\t14.9 mph
\nAvg Moving Speed:\t15.3 mph
\nMax Speed:\t18.6 mph<\/p>\n
\nAvg HR:\t159 bpm
\nMax HR:\t170 bpm<\/p>\n
\nAvg Bike Cadence:\t85 rpm
\nMax Bike Cadence:\t102 rpm<\/p>\n
\nTime:\t00:39:20
\nDistance:\t9.62 mi<\/p>\n
\nElapsed Time:\t00:39:48
\nAvg Speed:\t14.7 mph
\nAvg Moving Speed:\t14.7 mph
\nMax Speed:\t17.3 mph<\/p>\n
\nAvg HR:\t144 bpm
\nMax HR:\t162 bpm<\/p>\n
\nAvg Bike Cadence:\t90 rpm
\nMax Bike Cadence:\t160 rpm<\/p>\n